Morrison Brothers 710F-0300 1V 3″ Flanged Solenoid Valve


FIG 710F
Normally closed solenoid valves are used to help prevent the accidental siphoning of a product from a tank in the event of a leak downstream below the liquid level. Generally installed on the dispensing side of a fuel system pipeline. The valve opens upon the receipt of an electronic signal such as when a dispenser or pump is switched to the on position.

NOTE: Product can only be pumped in one direction, the direction of the flow arrow. Not designed for use as an overfill prevention or process control valve.


Print Friendly, PDF & Email

Standard Features

Normally closed, hung piston design

Install in a horizontal pipeline in the upright vertical position

Zero pressure differential

Integral thermal relief allows the valve to relieve expansion pressure in the opposite direction of flow

Continuous duty Class H standard coil operates at 120 volts

Enclosure is watertight and rated for hazardous locations—NEMA 3, 4X, 7 and 9; groups C and D

Several optional coil voltages available

Flanged body connections

Recommended for use with liquids having a maximum viscosity of 60 centistokes

A strainer with a 100 mesh screen is recommended at the valve inlet

Construction Details

Body: Cast bronze
Seals: Viton®, Teflon®
Solenoid housed in an integral, watertight, explosion-proof shell

Certifications & Listings

CSA approved for hazardous locations. Class I, Groups C and D; Class II, Groups E, F and G; Class III; T3C


FIG 710F Specification Sheet

Additional information

Weight 58 lbs
Dimensions 14 x 10 x 8 in


There are no reviews yet.

Be the first to review “Morrison Brothers 710F-0300 1V 3″ Flanged Solenoid Valve”

Your email address will not be published. Required fields are marked *