EthanolEthanol Production

June 13, 2011by tyrussum0

This is the same alcohol found in liquor and other spirits. Apart from beverages, its main use is as a gasoline additive used to reduce harmful vehicle emissions. It is most widely used in Brazil and the United States. In fact, these countries were responsible for 88% of the entire globe’s production in 2010.

Ethanol Sources


Surprisingly, this fuel is an additive used in petroleum fuels to reduce emissions – can in fact be produced from petroleum. In 2003, about 5% of the world’s ethanol was derived from petroleum. This synthetically produced product is indistinguishable from biological ethanol and works exactly the same. It is made by the catalytic hydration of ethylene using sulfuric acid as a catalyst. The ethylene and acetylene used in synthetic ethanol can be derived from calcium carbide, coal, oil gas, and other petroleum products.


The organic form is derived primarily from the carbon-based feedstock. Because the only energy needed to produce them comes from the sun and all minerals and nutrients are returned to the soil after harvest, agricultural feedstocks are considered to be renewable resources.

It can be produced from a wide variety of biological feedstock sources including:

  • Sugar cane
  • Bagasse
  • Miscanthus
  • Sugar beet
  • Sorghum
  • Switchgrass
  • Barley
  • Hemp
  • Kenaf
  • Potatoes
  • Sweet potatoes
  • Cassava
  • Sunflower
  • Fruit
  • Molasses
  • Corn
  • Stover
  • Grain
  • Wheat
  • Straw
  • Cotton
  • Biomass
  • Cellulose waste and harvestings

Production Process

Large scale production requires several steps to go from sugar cane in the field of petroleum products to pure form or synthetic form. The basic steps in this production process are:

  • Cellulolysis of cellulose and starch into sugar
  • Microbial sugar fermentation
  • Distillation
  • Dehydration
  • Denaturing


During the fermentation process, yeast is used to ferment sugars to produce it. Currently, this fermentation only works with sugars. Starch and cellulose – principally composed of sugars – can be converted to sugar for fermentation, but cannot be directly fermented.

Recently, however, a large amount of research has been directed to the area of cellulosic ethanol. A process whereby the cellulose found in plant matter is broken down into sugar and subsequently converted to ethanol.


In order to be used as fuel, the water found in ethanol must be removed. Water is removed through the distillation process. Due to the formation of a low-boiling water-ethanol azeotrope purity can only be taken to 95 – 96%. When used as a stand-alone fuel, the 4 – 5% water content is acceptable, but to be used as a gasoline additive, the ethanol must be further treated to remove all moisture.


There are several different dehydration methods of removing moisture from an azeotropic ethanol/water mix.

  • Azeotropic Distillation – Used in early production facilities, azeotropic distillation is a process whereby benzene or cyclohexane are added to the ethanol. This produces a vapor-liquid-liquid equilibrium. When distilled the pure ethanol can be extracted from the bottom column of this mixture.
  • Extractive Distillation – This early method of dehydration uses a ternary component which, when added to ethanol, increases its relative volatility. When distilled, this mixture produces ethanol on the column’s top stream.
  • Molecular Sieves – This distillation-free method of dehydration used molecular sieves to remove water from ethanol. The vapor is passed through molecular sieve bead beds under pressure. The beads absorb water and exclude ethanol.


Denaturing is the process of adding a chemical to the product to render it unfit for human consumption. This allows companies to use it for fuel to bypass liquor and other alcoholic beverage taxes.



Leave a Reply

A proud American manufacturer for over 25 years!

A Proud American Manufacturer!

Contact Us

1789 E CR 48, Bushnell, FL 33513

Headquarters, USA

All search results