Change capacity or package
FIREGUARD® / UL 2085 · Ready-2-Fill
Tank + fill, vent & monitoring equipment
An equipped storage tank for professionally specified dispensing integration.
500 gallons nominal · 450 gallons at 90% operating · 475 gallons at 95% maximum. Alarm and shutoff equipment depend on the selected package.
- Spill containment and overfill prevention
- Normal and emergency vent equipment
- Fuel-level and interstitial gauges
Configure the equipment around your fuel and site. The formal quote confirms the final supply scope.
Current catalog price
$17,777.19
In stock
BUYING OPTIONS
Order this tank configuration
Confirm the separate dispensing scope with your designer or installer. For integrated storage and dispensing, compare Turn-key; your contractor can purchase and install that package too.
01 / THE PACKAGE
What you’re choosing.
Your designer or petroleum contractor has specified separate dispensing equipment or confirmed suitable equipment to reuse. Envirosafe supplies the storage-side package for that installation.
Fill equipment
The listed package includes spill containment and overfill prevention equipment.
Venting
Normal and emergency vent equipment are part of the listed tank package.
Tank gauges
Fuel-level and interstitial gauges are included in the listed configuration.
- Who supplies the pump, hose and controls
- Equipment compatibility and tank connections
- Site work, unloading and commissioning
02 / CHECK THE FIT
Same 500 gallons.
Three equipment packages.
The difference is how much equipment comes with the tank—and what your team will specify separately.
Turn-key
Tank + dispensing equipment
Coordinate the tank and dispensing equipment together.
View Turn-keyReady-2-Fill
Tank + fill, vent & monitoring equipment
Supply or specify your dispensing equipment separately.
Current configuration
Bare tank
Tank for your equipment team
Have your equipment team specify the complete tank fit-out.
View Bare tankCATALOG REFERENCE
Dimensions & specifications.
Use approved configuration drawings for the installed footprint, equipment clearances and shipping arrangements.
| Weight | .5000 lbs |
|---|---|
| Dimensions | 90 × 63 × 77 in |
| Fire Rating: | Fireguard™ – UL2085 |
03 / YOUR SITE & FUELING NEEDS
Make the next conversation useful.
Bring what you know. Your project discussion can resolve the details that are still open.
What are you fueling?
Identify the fuel and blend, the vehicles or equipment, daily demand, and the time between deliveries.
How will fuel reach it?
Consider available power, pump performance, hose reach, metering, and who supplies each component.
What must happen on site?
Discuss the location, delivery access, unloading, pad and anchoring, electrical work, and commissioning.
IS 500 GALLONS THE RIGHT START?
450 gallons at 90% operating / alarm. 475 gallons at 95% maximum / shutoff.
Confirm the alarm and shutoff devices in your equipment package; bare tanks require them separately. Choose a delivery quantity that leaves enough fuel to last from ordering until delivery, plus a delay buffer. Check the turnover plan with your fuel supplier so you use the stored fuel while it is fresh.
Start with the space available and your expected fuel use between deliveries. Compare 1,000 gallons if delivery frequency or reserve needs call for more storage.
04 / PLAN THE INSTALLATION
Plan your 500-gallon
E-Cube installation.
Understand the power, space and preparation your project needs before equipment arrives.
ELECTRICAL PREPARATION
Specify dispensing power separately.
Ready-2-Fill supplies the storage-side package. The separately selected dispensing equipment determines its electrical supply.
- Dispensing pump
- Selected and electrically specified separately
- Monitoring / controls
- Identify the fitted devices and their power sources
- Circuit requirements
- Complete equipment schedule required
The selected equipment nameplates and approved electrical schedule define the supply, circuit protection and field connections.
What your electrician needsHow much of the 500 gallons can I use?
500 gallons is the nominal volume. Plan around 450 gallons at 90% operating capacity, with 475 gallons at 95% maximum fill. Fuel below the pump’s usable drawdown level and any retained reserve reduce the amount available to dispense. On equipped fuel systems, the overfill alarm is set at 90% and overfill prevention at 95%; verify the supplied devices and settings. Bare tanks require these devices separately.
What does the UL 2085 listing mean for my site?
This E-Cube uses a Fireguard® UL 2085 protected tank. Its listing is one part of the installation review. The tank listing does not establish all of the required site separations, equipment approvals or vehicle protection.
For motor-fuel dispensing, NFPA 30A and the adopted state or local fire code can affect tank construction, permitted capacity and separation distances. Fuel classification, attended or unattended use, nearby buildings, property lines and public roads all belong in that review. Commercial use alone does not establish one nationwide tank requirement.
Use the UL 2085 classification when reviewing permitted capacity and placement with the fire official.
See how tank protection changes site planningHow much room does the installed system need?
Use the selected configuration drawing for the complete equipment footprint, including mounted accessories. Tank body dimensions alone do not establish the installed space.
Add room for the selected pump, hose arrangement and fill access, fuel deliveries, vehicle turning and any required separation from buildings, roads and property lines. The foundation must be designed for the installed loads and anchorage, including stored fuel.
Where vehicle impact protection is required, its location and spacing add to the reserved area. Count posts for each exposed side and access opening on the site plan; tank gallons alone cannot determine the number.
View the bollard spacing exampleWhat concrete slab and how many bollards does a 500-gallon tank need?
Envirosafe’s suggested slab for a 500-gallon tank, from its concrete specification sheets:
| Tank construction | Suggested slab | Thickness | Suggested bollards |
|---|---|---|---|
| Fireguard® (UL 2085) | 12′-6″ × 18′-3″ | 6-inch slab on grade | 14 |
Slab on grade using 3,000 psi concrete with wire mesh and #5 rebar at 12 inches on center. These are Envirosafe’s suggested starting sizes for the tank and its mounted equipment. The project engineer designs the foundation for the site’s soil, frost depth and installed loads, and the fire official confirms the bollard layout for each exposed side.
See the suggested slab and bollards for every capacityWho decides what I can install at this address?
An authority having jurisdiction (AHJ) is the office responsible for a particular approval. Start with the fire-prevention office serving the installation address and the local planning/building department.
The fire official reviews fuel storage and dispensing arrangements. Planning reviews the proposed land use; building and electrical officials review the work within their jurisdiction. The state or local environmental program may also require tank registration, spill-prevention measures or approvals.
Bring the address, site plan, fuel types, tank capacities, construction listing and equipment drawing. Ask which code edition and local amendments apply, which permits are needed, and which inspections must happen before the first delivery of fuel.
See who reviews each part of the projectHow soon can I fuel after delivery?
Ready-2-Fill includes the fill, vent and monitoring package; dispensing is still separate. The pump, hose, controls and their connections must be supplied or coordinated. Equipment installation and testing determine the time from tank delivery to first fueling.
Have the contractor list the remaining equipment and field work, assign each task and coordinate the required inspections and first fuel delivery. Compare the full installed cost with a factory-assembled package before choosing on tank price alone.
Compare startup work, installed cost and future reuseWhat can I reuse if my location changes?
The Ready-2-Fill tank package can remain useful at a new location. Whether the complete fueling installation moves with it depends on the separate dispensing equipment and piping your team adds.
Plan qualified draining and preparation for transport, utility disconnection, lifting and haulage, followed by installation and commissioning at the destination. Check equipment condition, fuel compatibility and the new site’s approval requirements. Foundations, bollards and site utilities are separate from the movable equipment.
Evaluate what you can keep, replace or upgradeYOUR 500-GALLON READY-2-FILL PROJECT
Turn a tank choice into
a defined project.
Share your fueling needs and the scope you want us to supply. Your formal quote can bring the tank, equipment and project responsibilities together.





