Velcon Clean Diesel-Housings and Skids for Diesel Fuel Filtration VF-64, VF-65
Small Housings for Diesel Fuel Filtration
VF-64 & VF-65 assemblies are specifically designed to meet the filtration requirements of today’s high pressure common-rail diesel injection systems. The unit is used for fuel dispensing pumps or as a primary fuel filter/water separator on large diesel engine applications. VF-64 & VF-65 filter assembly were designed to meet the toughest
conditions and offer ease of filter change outs. The assembly features a “locking ring collar”, which attaches the filter housing to the aluminum die cast filter head with four bolts. The slotted “locking ring collar” allows maintenance personnel to hand loosen the four collar bolts, rotate, and lower the bowl assembly for filter changeouts. With a new filter cartridge installed, simply raise the bowl and rotate into position on the locking ring and hand tighten evenly (evenly torquing the 4 closure bolts to 100 lb-in is highly recommended).The closure hardware consists of stainless steel nuts, bolts, and washers with metal hand knobs for ease of maintenance. No wrenches or other special tools are required, allowing one person to easily change the filter cartridge (no V-band clamps are used).
- Die-cast aluminum head
- Steel filter bowl assembly
- Powder coated components
- Locking ring collar “no V-clamps”
- 1.5” NPT inlet and outlet
- Viton. seals for compatibility to
- Field proven performance
- Designed to withstand a max.
pressure of 150 PSI (10 bar) and
a maximum temperature of 240˚F
- Manual drain valve (.” NPT)
- Manual vent valve
- Sight glass (.” NPT)
- Wide variety of accessories,
filters and applications available
Water separator filters remove water and contaminants from hydrocarbon fuel streams and are the most popular filters.
Silicone treated fuel filters remove particle contaminants down to one micron. Silicone filters can also be used upstream, before a fuel filter/water separator to extend filter life.
CALL FOR PRICING