2,000 Gallon Dispenser Fuel System

Envirosafe’s 2,000 gallon dispenser system is a great setup for commercial & retail applications that want a stylish solution without lacking performance. Available with optional built-in protective canopy.
Benefits Of Our Fuel Dispenser System
  • Fireguard tanks insulate product in tank from ambient temperature variations, reducing emissions to the environment.
  • Available with dual compartments for multiple products in one tank with double bulk head to prevent cross contaminations
  • Primary and secondary tanks are tightness tested on site using standard air pressure test procedures
  • Steel outer wall provides low cost maintenance and protection from weathering
  • Primary storage tank and secondary containment are compatible with a wide range of fuels and chemicals
  • Support designs available for all seismic requirements
  • Interstitial space can be monitored for leak detection
  • Available in self-contained double walled and protected double walled tanks
  • Turn-key, inexpensive installation and startup
  • 30 year tank warranty backed by the Steel Tank Institute

2,000 Gallon Dispenser System Features

(1) UL-142 Flameshield or

UL-2085 Fireguard Tank Mounted on Saddles

(2) 6” 8 Oz Emergency Vent Male w/O-ring

(1) 2” Stack Vent w/ 2” Mushroom Cap

(1) 7.5 Gal 4” Aluminum Overspill Container 179 Series Hinged Style Fill Cap

(1)  818 Clock Gauge w/ Standard Float

(1) Engineered Hurricane Tie Down

(1) 1” Automatic Shutoff Nozzle, Breakaway Swivel 18′ x 1” Hose, 12” Jumper Hose

(1)  Tank Decal Kit

(1) Envirolastic 940 DTM Polyaspartic Urethane for High Performance Finish

(1) 1/3 Hp. Pump Assy w/ Anti-Syphon Valve & Ball Valve w/ FE Petro standard single-phase control box & NEMA 4 ENCLOSURE

(1) Single Product Dispenser Containment Pan

(1) Bennett Dispenser Single Hose/Single Product with 10:1 Pulser

(1) Interstitial Leak Gauge

(1) Emergency Shutoff Valve (Shear Valve)

(1) 18” Man way for easy inner tank accessibility

(1) UL Labeled & Listed (Per you local Fire Marshall)

(1) Step Ladder with Platform

STEEL THICKNESS 3/16” SHELL & 1/4” HEAD

(1) Touch-up Paint

Fireguard Benefits

UL 2080 Listed “Fire Resistant”

UL 2085 Listed “Protected”

Both Inner & Outer Steel Tanks built to UL Standards

Uniform Fire Code UFC “Protected” Tank

National Fire Protection (NFPA) 30 & 30A

International Fire Code (IFC)

Ballistics Protection

Impact protection

California Air Resources Board (CARB) for Air Emissions

Steel Tank Institute (STI) Standard F941 for Thermally Insulated Aboveground Storage Tanks

Flameshield Benefits

Tested Two-Hour Fire Resistance

Built to UL 142 Standards

Tested by Southwest Research Institute to SwRI 97-04

Double-Wall Tanks Have Fully Monitorable Interstitial Space for Leak detection

Dispenser Fuel System Maintenance

The tank operator should preform periodic walk-around inspections to identify and repair areas of damage to the vessel or the coating itself and check for proper drainage around the tank area. It is imperative that the tank exterior be inspected periodically to ensure that the integrity of the coating is maintained. The frequency of periodic repainting will be based upon environmental factors in the geographic area where the tank is located. Special consideration should be given to the selected of the paint, surface preparation and coating application. The coating selected should be suitable for use with the current coating, or the existing coating should ne removed. The coating selected should be of industrial quality Proper site preparation and maintenance are vital to ensure drainage of surface water. Should ground conditions change or settlement occur, take the appropriate steps to maintain proper drainage and prevent standing water near or under the tank area. For diked tanks, remove any product spills immediately. Be sure to dispose of hazardous material properly. For diked tanks fitted with a drain, drain off water only. Drain openings are required to be maintained liquid tight. The primary tank shall be inspected monthly for the presence of water at the lowest possible points inside the primary tank. Remove any water found. Water and sediment in fuel can cause plugging of filters. Also, bacterial growth, originating form the fuel can cause corrosion of tanks and lines. For procedures on how to check for the presence of water and removal of water, refer to the STI R111, Storage Tank Maintenance/For copies of the RP and more information, please go to www.steeltank.com. Failure to adhere with these maintenance instructions may void your warranty.

Tank relocation requirements – often aboveground storage tanks are relocated. The following instructions are to be followed when this occurs: All steps are to be documented and the documentation is to be kept for the life of the tank. The hazards associated with the cleaning, entry, inspection, testing, maintenance or other aspects of AST’s are significant. Safety considerations and controls should be established prior to undertaking physical activities associated with ASTs . Cleaning of tanks must be per state and local jurisdiction requirements. Refer to the STI Standard SP001, “Standard for the Inspection of Aboveground Storage Tanks” for requirements concerning tank inspections. The SP001 Standard details requirements for inspections based on the tank installation and age. A tank must undergo the appropriate insurance prior to relocation. In addition, the tank must be subjected to a pressure (or vacuum) test.

Dispenser System Accessories

  • Epoxy Lining
  • Polishing System
  • Level Monitoring
  • Fuel Management
  • Catwalk

Fireguard Specs*

Capacity (Gallons)2,000
Length (inches)168″
Width (inches)100.5″
Height (inches)126″
Weight Empty (lbs)6,650

Flameshield Specs*

Capacity (Gallons)2,000
Length (inches)168″
Width (inches)73.5″
Height (inches)96″
Weight Empty (lbs)6,700
Print Friendly, PDF & Email
All search results