E-CUBE MOBILE 528G
The Envirosafe 528G E-Cube Mobile is 110% contained. It is UL-142 and DOT certified and holds 528 gallons. It is a perfect portable fuel storage source and is easily stackable to allow you to haul fuel over the road. It can allow you to connect multiple pieces of equipment at once. Inside, it can hold an electric or hand pump as well as a hose reel. CALL FOR PRICING
APPROVALS & CERTIFICATIONS
UL-142 / ULC-S601
UN31 A/Y US D.O.T (View DOT Regulations)
CAN CGSB 43.143,2016
(IBC) Intermediate Bulk Container
Lifting when Full Certified
Primary Hatch Plate
Stacking Corners & Lifting Lug
Universal Pump Bracket
SPECIFICATION DATA SHEET
PRIMARY: 3” fusible fill cap, 2” pressure vacuum vent, standard breather vent, 3 x 1 1/4” feed.
Fitting Plate: Sockets, 3 x 1” return sockets, float level fuel gauge.
SECONDARY: Fitting Plate: Supplied with blank plate as standard, optional return & feed sockets available.
|Capacity (Gallons)||528||Inner Tank Thickness(In)||8 gauge(11/64″) base|
|Capacity (Liters)||2,000||Outer Tank Thickness(In)||8 gauge(11/64″) base|
11 gauge(1/8″) side wall
|Length (Inches)||99||Weight, empty (lbs)||2160|
|Width (Inches)||43||Weight, with fuel (lbs)||5908|
|Height (Inches)||42||Safe Fuel Fill Level (Gallons)||502|
2. Primary Hatch Cover Lid
3. Stacking Cover with Lifting Lugs
4. Primary Hatch Fittings Plate
5. Bracket for Dispensing Nozzle
6. Internal Steel Fuel Pipes
7. Pump Bracket System
8. Hose Reel Brackets
9. Forklift Access
10. Secondary Hatch Cover Lid
11. Secondary Hatch Fittings Plate (fitting optional, extra)
12. Inner Primary Tank Lifting Lug
13. Inner Primary Tank
14. External Bund Tank
15. Skid Mounted Base Frame
16. Bi-Directional Forklift Pockets
Inner Tank: The inner tank is a primary storage tank having all fuel transfer accessories and externally encased within an outer bund tank.
Outer Tank: Outer bund designed to contain 110% on the inner tank volume it surrounds & wraps the main inner tank unit, has the interstitial space between inner & outer tanks. Therefore any potential leak that may occur will be captured in this sealed space, preventing the release to the environment.
Top Lid: The top plate used to cover the inner tank.
Fuel Fill: Fuel fill inlet used to fill the inner fuel tank in a secure way, without sparks and spillages. Automatic or manual latch nozzles can be used for filling.
Fuel Suction: Feeding of the engine (through a pump). Fuel suction pipe provided up to the level of 4″ above from the bottom of the inner tank is used to withdraw fuel from the inner tank to the outlet unit (Genset/Engines). There are 2 suction points provided to feed the 2 units (Gensets/Engines) at the same time.
Fuel Return: Used as a return inlet for the excess fuel withdrawn from the tank. Normal Vent: Used to relieve vacuum and pressure of fuel as it expands and contracts.
Emergency Vent: Emergency vents are installed on aboveground storage tanks as a code requirement. Emergency vents provide high capacity pressure relief if the tank is exposed to fire. When the internal tank pressure reaches the opening pressure of the emergency vent, the weighted cover moves up on the center pin allowing air to escape. When the internal tank pressure falls, the cover automatically lowers back.
Fuel Level gauge: A fuel gauge is used to indicate the level of fuel contained in a tank. To measure or evaluate the remaining quantity of fuel in the tank.
Note: Over-fill provision can be provided as per client request.
Pump Kit: The pump kit takes the fuel from the day tank and uniformly flows the fuel to the required portable units with control of flow capacity.
3″ Adapter Male/Female Thread Aluminum$25.09
3″ Dust Cap For Use With Aluminum Adapters$32.74
Bushing Reducer$1.67 – $2.78
Cim-Tek 260 Series Hydrosorb Filter 70062$218.76
Emergency Vent Package$865.98
Fill-Rite FR151 Hand Pump$209.00
Fill-Rite NX3204F Foot Mounted Pump Only$962.00
Fill-Rite NX3210FB Foot Mounted Pump, Hose and Nozzle$1,122.00
Fuel Hose w/ Male Ends 843BT$142.57 – $450.00
Hand Pump Bracket$52.00
Hannay Hose Reel N815-23-24-10.5
In-Line Digital Turbine Meter$189.01
Jomar M x F Thrd Ball Valve$14.53 – $20.56
PIUSI EX140 120V Heavy Duty AC Powered Transfer Pump
PIUSI EX75 ATEX 12V DC Pump
PIUSI K24 Flow Meter$240.02
Quick Disconnect$36.23 – $126.81
Limited Access Worksites
For a logistically challenging site that requires fuel, an E-Cube can be safely lifted by crane or forklift quickly and easily.
They meet worldwide transport regulations, thus the E-Cube can transport fuel safely anywhere you need it. They are also designed to stack inside shipping containers & across truck beds providing economical transport.
On-Site Fuel Supply
You can easily fuel machinery on-site when needed and save time by not waiting for fuel delivery.